Sustainable tourism development model for policy formulation
Volume 10, Issue 3, Summer 2025, Pages 467-482
https://doi.org/10.22034/IJHCUM.2025.03.05
M. B. Talukder, Md. M.H. Sawon, F. Kabir, Md. A. Hossain
Abstract BACKGROUND AND OBJECTIVE: In recent years, sustainable tourism has gained significant attention due to integrating economic, social, and environmental goals into tourism development. Bangladesh, with its diverse cultural and geographical aspects, faces challenges in its tourism sector. To tackle these issues, a comprehensive and sustainable model for tourism development is needed, incorporating sustainability into all development and management phases. The study aims to develop a sustainable tourism development model for Bangladesh's socioeconomic and environmental resources.
METHODS: The study uses a qualitative research method guided by a review of the available secondary data – policies, literature, and domestic and international case studies. This study also applies the thematic analysis of the data gathered in the study method to address a policy gap in Bangladesh's tourism sustainability by identifying a whole system policy strategy.
FINDINGS: The sustainable tourism development model suggests cooperation between government agencies, local community members, the commercial sector, and non-governmental organizations. Environmental Impact Assessments, conservation, and climate change mitigation should be included in tourist management. The approach emphasizes community empowerment, non-uniform tourist benefits, and cultural conservation. The study suggests that Bangladesh's sustainable tourism development should be dynamic, flexible, and contingent on sustainability principles to its fullest (100%).
CONCLUSION: The sustainable tourism development model is a holistic approach to sustainable, inclusive, and equitable tourism policies, focusing on ensuring economic growth, environmental conservation, and social equity integration. By involving stakeholders and promoting community participation, the model addresses concerns about power, strategy, and interests, and promotes principles of eco-tourism, smart tourism, and climate resilience. This research contributes to a significant policy formulation for the tourism industry in Bangladesh by proposing a sustainable tourism development model.
Evaluation and selection of hydro power plant location using the Analytical Hierarchy Process-TOPSIS method
Volume 10, Issue 2, Spring 2025, Pages 345-360
https://doi.org/10.22034/IJHCUM.2025.02.10
N. Amani
Abstract BACKGROUND AND OBJECTIVES: The strategic choice of where to locate a hydropower plant affects both the facility's financial performance and the long-term sustainable growth of the surrounding area. This study aims to evaluate the accurate location planning of power plant establishment for electricity production in western Mazandaran.
METHODS: The Analytical Hierarchy Process is used to assess feasibility, identify the optimal location, and determine the most suitable type of green energy plant. Cost analysis is also conducted to identify the location minimizing energy consumption and associated risks. Finally, recommendations for the most suitable location are presented. Based on this, 6 cities located in the west of Mazandaran province have been selected as case studies. The research was conducted between 2020 and 2023. This research involved preparing a topographic map and using software to determine green locations for electricity production in western Mazandaran, based on a 15-year return period. A comparison is made between the electricity generation system from green energy and the electricity generation system from fossil sources. This comparison examines net production cost, sensitivity analysis, and environmental pollution for both green and fossil fuel systems. The feasibility and effectiveness of a green energy system are then evaluated based on geographical conditions and year-round electricity consumption profiles. Finally, using the Analytical Hierarchy Process hierarchical analysis results, we identify the most optimal location for equipment installation, considering economic efficiency, geographical conditions, and year-round electricity consumption.
FINDINGS: The findings reveal that downstream areas with a low slope are best suited for green and sustainable energy production due to their hydrological characteristics and potential for a sustainable supply chain. While eastern regions have high hydropower potential, construction costs are also high. The total cost for a green and sustainable power plant is 2.2 billion Tomans, while sustainable and uneconomical options cost 14 billion Tomans and 24.3 billion Tomans, respectively. Finally, to propose optimal locations for green and sustainable power plants, three precise coordinates for points A, B, and C have been identified.
CONCLUSION: This study identifies 40 potential locations for green and sustainable power plants, with additional locations identified for sustainable and non-economic options. Cost and time comparisons show significant advantages for green and sustainable plants. Three specific locations (A, B, and C) with precise coordinates are recommended for further development. This research concluded that eastern areas in the west of Mazandaran, particularly near rivers, are generally well-suited for constructing hydropower plants.
Evaluating environmental effects in construction and demolition waste recycling plant with the Iranian Leopold Matrix method
Volume 8, Issue 2, Spring 2023, Pages 245-260
https://doi.org/10.22034/IJHCUM.2023.02.07
S. Salehi, F. Gholamreza Fahimi, Masoud Kiadaliri, A. Tavana, K. Saeb
Abstract BACKGROUND AND OBJECTIVES: Recycling and reusing construction and demolition debris is a productive step toward solving this problem. Still, the recycling process also leaves industrial effluents, which is evident in producing recycled sand. The present research has investigated the environmental effects of recycling construction debris at sand recycling plants. Considering the negative impacts of sand washing mud produced at the plant in the Aab'Ali Landfill of Tehran in Iran, the material's physicochemical characteristics and environmental impact have also been investigated to regulate practices.
METHODS: The Environmental Impact Assessment has been carried out in physicochemical, biological, socio-cultural, and economic-technical areas. Due to the large dispersion of the studied soil and the composition diversity in each sampling, 30 samples of the sand washing mud and the material mixed with the surrounding soil have been collected. The exploitation phase during the factory construction plan's implementation stage was considered the current research's main phase. Hence, 13 micro activities and 23 environmental parameters were identified, and the results were analyzed in the Environmental Impact Assessment Plus Software using the Iranian Leopold Matrix method and discussed based on the results of the experiments.
FINDINGS: According to the results of the matrix calculation, the three micro-activities included washing the sand through a sand-washing machine, fine sand washing through the EvoWash machine with a score of -3.6, converting concrete pieces and large boulders into smaller pieces by jackhammers, transferring to the jaw crusher machine with a score of -2.8, and transferring the remaining sand washing mud produced by the EvoWash machine to the storage pond with a score of -2.7 had the most negative effects. The three micro-activities of waste processing for green space irrigation (+2.2), selling products (+0.9), and hiring employees with a score of +0.5 have the most positive effects on the environment. As ranking smaller than -31 forming 50% of the total average of rows and columns, the activity of the plant and the sand extraction process in this landfill is approved by providing modification alternatives.
CONCLUSION: Considering the positive impact on the economy, increasing green spaces in the region, job creation, and also reducing the amount of increasing debris accumulated in the landfill is evaluated positively and can be done considering the reforms; including the prevention of releasing remnant sand washing mud freely and recycling it instead. Reusing the sand washing mud requires improving the water purification systems used in the EvoWash machine.
